Not a government website. Not legal advice. England only. We are a private company, not affiliated with GOV.UK, the Ministry of Housing, Communities and Local Government or any council. Registration is done on the official service.
What is a gas safety certificate (CP12)?
A gas safety certificate is the written record of a landlord’s annual gas safety check, made by a Gas Safe registered engineer for every gas appliance and flue the landlord provides. The regulations call it a gas safety record; CP12 is the old form number most engineers and letting agents still use. There is no official form: HSE says any record is valid if it contains the required details and the engineer is on the Gas Safe Register.[3]
The duty covers fixed and portable appliances, including portable LPG heaters, that you own and provide for the tenant.[1][5] A tenant’s own cooker or fire is the tenant’s responsibility, but HSE recommends including every flue in the check.[5] Landlords who let a room to a lodger, and owners of a flat above a shop, are landlords for this purpose; a family member living rent-free is not.[4]
The 12-month rule and the 2-month window
A landlord gas safety certificate is due again 12 months after the last check: the Gas Safety (Installation and Use) Regulations 1998 require every appliance and flue the landlord provides to be checked within 12 months of being installed and then at intervals of not more than 12 months.[1] Since April 2018 a check completed in the 2 months ending with the deadline is treated as made on the deadline (regulation 36A), so booking early inside that window never shortens the year.[2] A check before the window starts a new 12 months from its own date.
| Step | Date |
|---|---|
| Window opens: a check from this day keeps the deadline | 14 January 2027 |
| Deadline for the next check | 14 March 2027 |
| Copy to the tenants | Within 28 days of the check |
| Following deadline if checked in the window | 14 March 2028 |
CP12 renewal window checker
Enter the date of the last check and the date you have booked. See whether the new check keeps your date, the next deadline and what to give tenants.
Your new CP12
Keeps your date
Keeps your date: a check from 14 January 2027 counts as made on 14 March 2027, so you lose nothing.
| Deadline set by the last check | 14 March 2027 |
|---|---|
| 2-month window opens | 14 January 2027 |
| Copy of the new record to tenants by | 20 March 2027 (28 days) |
| Next deadline after this check | 14 March 2028 |
| Keep the record until | two further checks are made (about 14 March 2029) |
Runs in your browser; nothing is sent. It follows regulations 36 and 36A for appliances you already check every year; the one-off rule for lining up a new appliance is not included.
How long does a gas safety certificate last?
A gas safety certificate lasts 12 months from the date of the check, or to the old deadline plus 12 months when the check was made in the 2-month window.[1][2] A new tenancy does not need a new check: HSE says a record is current for 12 months, so if the tenancy starts inside that period you give the new tenant a copy of it before they move in.[6] If the property stood empty and the appliances may have been tampered with, HSE recommends a fresh check before the new tenant gets the keys.[7]
| Who | When |
|---|---|
| Existing tenants | Within 28 days of the check |
| A new tenant | Before they move in |
| Stays under 28 days (holiday lets) | A copy displayed in a prominent place |
| Your own file | At least 2 years, or until two further checks with the 2-month rule |
Sources: regulation 36 and the HSE guidance on records.[1][3] You can keep and send the record electronically if it can be printed, is secure and identifies the engineer; a tenant can always ask for paper.[3]
What the gas safety record must show
The engineer’s record must contain, as a minimum:[1][3]
- a description and the location of each appliance or flue checked;
- the date of the check and the address of the property;
- the name and address of the landlord or the agent (the landlord does not have to sign);
- any safety defect found and any remedial action taken;
- the engineer’s name, Gas Safe registration number and signature, and confirmation that the checks in regulation 26(9) were made.
Only a Gas Safe registered engineer may do the check or any work on the gas fittings, and a former gas fitter who is not registered cannot check their own property.[4] Keeping the gas and electrical safety of a let home in order is one of the general duties of every landlord.[10]
Landlord or tenant: who is responsible for which gas job
HSE splits the gas duties as below; a clause in the tenancy agreement, even a full repairing and insuring lease, cannot pass the landlord’s duties to the tenant.[8]
| Job | Who | How often or when |
|---|---|---|
| Gas safety check of appliances and flues you provide | Landlord | Every 12 months, by a Gas Safe registered engineer |
| Servicing of appliances and flues | Landlord | As the manufacturer says; if unknown, HSE recommends yearly |
| Installation pipework | Landlord | Not part of the annual check; HSE recommends a soundness test with it, after damage and between tenancies |
| Re-letting after tenants leave | Landlord | All appliances safe and an up-to-date record given to the new tenant before they move in |
| Heating switched off as unsafe | Landlord | Provide emergency heating while a Gas Safe engineer does the repair |
| Repairs from wear and tear | Landlord | When needed; tenant damage follows the tenancy agreement |
| Tenant’s own appliance, and a flue serving only it | Tenant | HSE still recommends including every flue in your check |
Sources: HSE pages on maintenance and on dealing with tenants.[7][8] If a tenant leaves an appliance behind and you keep it, it joins your annual check and maintenance.[7] A carbon monoxide alarm is a separate duty: see the smoke and CO alarm rules.
Defects, access and the tenant
If the check finds a defect, the landlord must have it put right promptly and make sure an unsafe appliance is not used until it is fixed; the engineer still issues the record straight away, and you add the follow-up work to it.[4][3] If the heating is disconnected as unsafe, HSE says the landlord provides emergency heating while the repair is arranged.[8] Repair deadlines for hazards in private lets are changing too: see Awaab’s Law for private landlords.
When a tenant will not let the engineer in, you must not force entry. HSE expects repeated, recorded attempts: leave a note after a missed visit, write to explain that the check is a legal duty, and offer the tenant a chance to set the appointment.[8] The duty cannot be handed to a tenant through the tenancy agreement.[8]
The register and your other dates
Once the property is on the government’s register, a renewed gas safety certificate has to be uploaded within 28 days, like any other change; our page on landlord registration fees and dates lists what else it asks for.[9] The electrical report runs on a 5-year cycle instead: see EICR for landlords. The landlord compliance calendar puts the gas, electrical, EPC and registration dates for one property side by side. The annual gas visit is also a good moment to review your legionella risk assessment, which HSE says can be checked during routine visits.[11]
Frequently asked questions
What is a gas safety certificate?
It is the record a Gas Safe registered engineer fills in after the landlord’s annual gas safety check. The law calls it the gas safety record; landlords and engineers often call it the landlord gas safety record, the gas safety certificate or the CP12.[3]
What is a CP12 certificate?
CP12 is the old name of the form for the landlord gas safety record, and many engineers still use it. HSE now calls it the landlord gas safety record; there is no official form, and any record with the required details, filled in by a Gas Safe registered engineer, is valid.[3]
How long does a gas safety certificate last?
Do homeowners need a gas safety certificate?
No. The annual check and record are duties of landlords. An owner who lives in the home is not required to have one, although HSE recommends servicing appliances as the manufacturer advises. Renting a room to a lodger makes you a landlord, and then the check is required.[4]
How long do I keep gas safety records?
Sources
- Gas Safety (Installation and Use) Regulations 1998, regulation 36
- Gas Safety (Installation and Use) Regulations 1998, regulation 36A
- Gas safety check records and what to keep
- Gas safety checks: who needs them?
- Gas safety checks: what needs them?
- Gas safety checks: what if…?
- Maintenance: gas appliances and flues
- Gas safety: dealing with tenants
- Register your rental property service: guidance for landlords
- Renting out your property
- Legionella and landlords' responsibilities