Legionella risk assessment for landlords

A legionella risk assessment is a landlord’s check that a let property’s water system does not let legionella grow. HSE says it is a legal duty but does not need to be in-depth, most landlords can do it themselves, and the law does not require a legionella test certificate.[1]

Legionella risk assessment for landlords: self-check

Tick what the property has. You get the control measures and tenant advice HSE describes, ready to print as your record.

Your assessment

Low risk

Matches HSE’s low-risk example: a simple assessment, recorded and reviewed when something changes, is usually enough.

Control measures

  • Flush the system before each new tenancy.
  • No stored water (combi boiler or instantaneous heaters): HSE says this lowers the risk further.

Tell your tenants

  • Report hot water that is not heating properly, or any other problem with the water system.
  • Clean and descale showerheads regularly (HSE suggests quarterly or as the assessment decides).

Runs in your browser; nothing is sent. This is your own assessment record, not a certificate: the law does not require a legionella test certificate.

On this page
  1. What the law requires
  2. The low-risk property
  3. Control measures: keep hot water hot, cold water cold, and moving
  4. Empty properties
  5. What to tell tenants
  6. Fitting it into your other dates
  7. FAQ
  8. Sources

Not a government website. Not legal advice. England only. We are a private company, not affiliated with GOV.UK, the Ministry of Housing, Communities and Local Government or any council. Registration is done on the official service.

What the law requires

Landlords must assess the risk from legionella to their tenants and control it, but HSE says the assessment for an ordinary home does not need to be in-depth or detailed.[1] The duty comes from the Health and Safety at Work etc. Act 1974 (section 3(2), with landlords treated as self-employed under section 53) and the Control of Substances Hazardous to Health Regulations; HSE’s Approved Code of Practice L8 explains how they apply.[1]

A landlord for this purpose is anyone renting out a property under a lease or licence shorter than 7 years, including a single room in their own home.[1] HSE and councils do not proactively inspect homes or ask for evidence of the assessment, but if a tenant caught Legionnaires’ disease from the water system the landlord could be prosecuted and would have to show they had met the duty.[1]

Legionella: what is and is not required of a landlord
QuestionAnswer (HSE)
Risk assessmentRequired, but simple and proportionate
Who can do itThe landlord, or someone they ask
Legionella test certificateNot required by law
Water samplingNot usually; only in very specific circumstances
Written recordNot a duty for most landlords (only employers with 5 or more employees), but wise to keep
ReviewNo fixed interval; when anything changes

Source: HSE guidance for landlords.[1]

The low-risk property

Most homes are low risk because water is used every day and the system turns over.[1] HSE’s typical low-risk example has daily use that turns over the whole system, cold water straight from the mains with no storage tank, and hot water from instantaneous or low-volume heaters.[1] Combi boilers and electric showers lower the risk further because no water is stored.[1] For such a property a simple assessment may show no real risk, and no further action is needed beyond reviewing it when something changes.[1]

Control measures: keep hot water hot, cold water cold, and moving

Temperature is the most reliable control for a domestic system: hot water stored at 60°C or more and cold water kept below 20°C, with water moving through every outlet.[1][2]

  • Flush the system before letting the property.[1]
  • Fit cold water tanks with a tight-fitting lid and air vent, and check they are clean at least yearly.[2]
  • Set a hot water cylinder to store water at 60°C; hot outlets should reach at least 50°C within 1 minute.[1][2]
  • Remove redundant pipework and flush little-used outlets weekly.[1][2]
  • Clean and descale showerheads, quarterly or as the assessment decides.[2]
Legionella checks, targets and how often (HSE, hot and cold water systems)
Part of the systemTargetHSE check interval
Cold water tankIncoming and stored water below 20°C; tank cleanTemperature at the ball valve every 6 months; cleanliness at least yearly
Cold taps and showers (sentinel outlets)Below 20°C after running for 2 minutesMonthly
Hot water cylinderStored at 60°C or more; outgoing water at least 60°CMonthly, with findings recorded
Hot taps (sentinel outlets)At least 50°C within 1 minuteMonthly
Little-used outletsWater kept movingFlush weekly
Showerheads and hosesClean and free of scaleQuarterly, or as your assessment decides

These intervals are HSE’s general guidance for hot and cold water systems; for a typical low-risk home with a combi boiler and no tank, your own assessment can decide that fewer checks are needed.[2][1]

Empty properties

A property left empty needs its outlets run at least once a week; HSE gives student lets empty over the summer as the example.[1] For long empty periods, a flushing routine or draining the system are the options HSE names.[1]

What to tell tenants

Tenants should know the control measures they help keep in place: not turning down the hot water cylinder, cleaning showerheads regularly, and reporting hot water that is not heating properly or any other problem.[1] The self-check above lists these for your property so you can give them with the tenancy papers.

Fitting it into your other dates

HSE suggests checking the water system during visits you already make, such as the annual landlord gas safety certificate check.[1] The landlord compliance calendar shows that date with the EICR certificate, EPC and registration dates; the landlord registration fees page covers the new property register.

Frequently asked questions

Do landlords need a legionella certificate?

No. Health and safety law does not require landlords to obtain or produce a legionella test certificate. The duty is to assess the risk and control it.[1]

Can a landlord do their own legionella risk assessment?

Yes. HSE says most landlords can assess the risk themselves and do not need to be professionally trained or accredited; a landlord who does not feel competent can ask someone else to do it.[1]

How often should a legionella risk assessment be reviewed?

The law sets no fixed interval, such as every year or every two years. Review it periodically and whenever something changes in the water system; checks can be made during visits such as the annual gas safety check.[1]

Is legionella testing required in a rental property?

Not usually. HSE says sampling a domestic hot and cold water system for legionella is needed only in very specific circumstances; temperature checks are the reliable way to confirm the system is under control.[1]

Sources

  1. Legionella and landlords' responsibilities · Health and Safety Executive, 2024-09-30
  2. Hot and cold water systems: things to consider · Health and Safety Executive, 2024-09-26